Published: 2017/02/15 15:34:10
Source:
1. Power on the controller by pressing [B+Y+Power] (hold B and Y first in off state, then press Power until lights on).
2. Rotate the joystick to its maximum outer diameter twice and release (any rotation is acceptable; software detects edge values).
3. Hold Power to shut down (critical: calibration data saves only after normal shutdown).
1. Power on the controller by pressing [B+Y+Power] (hold B and Y first in off state, then press Power until lights on).
2. Rotate the joystick to its maximum outer diameter twice and release (any rotation is acceptable; software detects edge values).
3. Hold Power to shut down (critical: calibration data saves only after normal shutdown).
4. After shutdown, the controller will be reset to factory settings.
1. Go to [Settings] → [Accessibility] → [Physical], enable [Screen Keyboard] at the bottom.
2. Toggle 'One-Handed Mode' off-on twice, then disable it.
Power off the controller, hold Power for 8s until blue light flashes (clears configs).
Unpair old devices on phone, then re-scan.
